# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
After creating the network scan it for services.

# entries[].props[].description
The network's priority. The network with the highest priority value will be used out of preference if available. See Help for details.

# entries[].props[].description
When streaming a service (via http or htsp) Tvheadend will use the network with the highest streaming priority set here. See Help for details.

# entries[].props[].description
The maximum number of input streams allowed on this network.

# entries[].props[].description
Maximum time to wait (in seconds) for a stream before a timeout.

# entries[].props[].description
The scrambled bits in MPEG-TS packets are always cleared. It is a workaround for the special streams which are descrambled, but these bits are not touched.

# entries[].props[].description
Time (in minutes) to re-fetch the playlist.

# entries[].props[].description
Key and value pairs to remove from the query string in the URL.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
After creating the network scan it for services.

# entries[].props[].description
The network's priority. The network with the highest priority value will be used out of preference if available. See Help for details.

# entries[].props[].description
When streaming a service (via http or htsp) Tvheadend will use the network with the highest streaming priority set here. See Help for details.

# entries[].props[].description
The maximum number of input streams allowed on this network.

# entries[].props[].description
Maximum time to wait (in seconds) for a stream before a timeout.

# entries[].props[].description
The scrambled bits in MPEG-TS packets are always cleared. It is a workaround for the special streams which are descrambled, but these bits are not touched.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of ISDB-S muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of ISDB-C muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of ISDB-T muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of ATSC-C muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of ATSC-T muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of DVB-S/S2 muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.

# entries[].props[].description
The orbital position of the satellite your dish is pointing at.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of DVB-C muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.

# entries[].props[].description
Limited/limit scanning to this network ID only.

# entries[].props[].description
Discover more muxes using the Network Information Table (if available).

# entries[].props[].description
Skip scanning known muxes when Tvheadend starts. If "startup scan" is allowed and new muxes are found then they will still be scanned. See Help for more details.

# entries[].props[].description
When nothing else is happening Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working when the inputs are not used for streaming. If your adapters have problems with lots of (endless) tuning, disable this. Note that this option should be OFF for the normal operation. This type of mux probing is not required and it may cause issues for SAT>IP (limited number of PID filters).

# entries[].props[].description
Use the provider's service IDs as channel numbers.

# entries[].props[].description
Don't use the provider's channel numbers.

# entries[].props[].description
The character encoding for this network (e.g. UTF-8).

# entries[].props[].description
Total number of muxes found on this network.

# entries[].props[].description
Total number of services found on this network.

# entries[].props[].description
Total number of mapped channels on this network.

# entries[].props[].description
The number of muxes left to scan on this network.

# entries[].props[].description
Use a pre-defined list of DVB-T/T2 muxes. Note: these lists can sometimes be outdated and may cause scanning to take longer than usual.